waste plastic cushing,washing and drying line

Size Reduction Wet grinding: A wet granulator size-reduces the films while the wash water removes paper and foreign body contamination from the films.Separation of dirty water: The wash water from the granulator is separated from the PP/PE films.Separation in waterDensity separation step: In the water bath or with a hydro cyclone a heavy fraction is separated from the light fraction (PP/PE)Hot washing stepMaterial storage basin / preheating: The films are heated to the temperature of the hot washing step.Intensive washing and dispersion: The films are thoroughly washed in hot water, soda and detergents; glues, ink and oil are dissolved.Separation according to density: In a poaching tank, remaining polyester and sank dirties are separated from the polyolefin.Separation of the suds: The hot wash water with the detergents in it is separated from the films.Treatment of the suds: The hot wash water is enriched with lye and detergents.Clean rinsing: The clean films are rinsed in water in order to obtain a neutral pH value.Intensive washer and spraying washer: As an compliment to separation tank to remove the suds and dirties from the filmsTreatment of filmsMechanical dewatering: The films are dewatered with a centrifugeThermal dryer: The films are dried to the required residual moisture with a thermal heaterCyclone silo: Separate the remaining dirty powders with blower and store the crystallized filmsBag system: Store the flakes in bags for reuseWater Treatment Water collection, screening: The dirty water is collected in a pit and any contamination larger than appr. 0.1 mm is removed.Sedimentation: The screened water is stored in a sedimentation basin for the sedimentation of light contamination; the result is circulation water.Storage: The mechanically treated circulation water is stored.Treatment of fines: In a chemical or physical water treatment plantReconveying into the plant: A pump conveys the circulation water back into the plant.Neutralization (waste water): Decrease of the pH value according to the regulations for public water treatment.These functional units represent possible procedure steps when PET bottles are recycledThey are selected according to the frame parameters of the feed material and the desired final product when such a plant is designed.The single functional units are combined with conveying systems (belt conveyors, conveying screws, elevators, blowers, pumps) appropriate to the specific nature of the product and in relation to their location. Type and volume of the necessary conveying systems are determined in respect to the project.